PV Powered 4600 Instructions d'exploitation télécharger pdf (Page 24)

6. OPERATION OF THE PROTECT PV 4600

6.1 auto-PowER

The PV-Inverter starts up automatically once DC-power from the PV-

Panel is sufﬁcient. There are 3 modes of operation.

6.2 oPERating modEs

1. Normal

In this mode, the PV-Inverter automatically detects the system status

and selects the best mode of operation.

If the power from the PV-Panel is higher than 150VDC, the supply is

converted to AC and fed in to the grid. If the power is less than 100

VDC, the PV-Inverter displays “Waiting”. During the wait state, the

device uses minimal power from the PV-Panel to monitor the system

status. During normal mode, the green LED is on.

Function Button

Power-on LED

Fault LED

LCD Display

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Pas de commentaire

PV Powered 4600 Instructions d'exploitation Page 24