PV Powered 3000 Manuel d'installation Page 48

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 76
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 47
Opening and Closing SMA Solar Technology AG
48 SB25_30-IA-IEN115050 Installation Manual
7.3 Closing the Inverter
1. Establish the protective conductor (PE) connection to the enclosure lid.
2. Attach the enclosure lid of the inverter by evenly
tightening the four lid screws.
3. Check the DC connectors for correct polarity and connect them.
To unlock the DC connectors, see Section 7.2 "Opening the Inverter" (page45).
4. Close all the DC inputs that are not needed as described in Section 5.4.4 "Connecting the PV
Array (DC)" (page33) to seal the inverter.
5. Attach the AC plug.
6. If an external DC switch-disconnector is available, connect the external DC switch-disconnector.
Vue de la page 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 75 76

Commentaires sur ces manuels

Pas de commentaire