PV Powered PVP4800 Informations techniques télécharger pdf (Page 59)

B.1 Field Conﬁguration of an Inverter for Use with

Positively Grounded PV Arrays

If the inverter is:

• Equipped with an Integrated AC/DC Disconnect, use the instructions

in “Inverter

with

an Integrated AC/DC Disconnect”.

Otherwise, if the inverter is:

•

Not

equipped with an Integrated AC/DC Disconnect, skip to the sec-

tion titled “Inverter

without

an Integrated AC/DC Disconnect”.

Inverter with an Integrated AC/DC Disconnect

1. Inside the inverter remove both the grounded and ungrounded

conductors from the terminals on the Power Board.

Inverter’s Power Board DC

Terminals

Figure B-1 Inverter’s Power Board Terminals

2. Install the black conductor into the center “+” terminal on the right

side.

3. Install the white conductor into the center “–” terminal on the left

side.

Appendix B - Ground Conﬁguration

APPENDIX B

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 83 84

Pas de commentaire

PV Powered PVP4800 Informations techniques Page 59