PV Powered 5200 Manuel télécharger pdf (Page 16)

Installation

5.5 Installation tools

5.6 Installation steps

Below tools are needed before installation.

Step1: Drill holes in the wall with diameter 6mm driller according to the size of bracket. Keep drilling

perpendicular to the wall, and don’t shake when drilling to avoid damage to the wall. Then put expansion

pipe into the hole, use rubber hammer to tap the pipe into the wall completely. Put the bracket into

expansion pipes and then use expansion screws to fasten bracket.

Mounting bracket on the wooden wall is as the following picture.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Pas de commentaire

PV Powered 5200 Manuel Page 16