SMA Solar Technology AG Mounting
Installation Guide SB25_30-IEN092520 11
4 Mounting
4.1 Selecting the Mounting Location
Observe the following conditions during installation:
• The installation method and mounting location must be suitable for the weight and dimensions
of the Sunny Boy (see section 11 "Technical Data" (page42)).
• Mount on a solid surface.
• The mounting location must be accessible at all times.
• Vertical installation or tilted backwards by max. 45°.
• Connection area must point downwards.
• Never install the device with a forward tilt.
• Do not install horizontally.
• Install at eye level in order to allow operating status to be read at all times.
DANGER!
Danger to life due to fire or explosion!
Despite careful construction, a fire can occur with electrical devices.
• Do not mount the Sunny Boy on flammable construction materials.
• Do not mount the Sunny Boy near highly flammable materials.
• Do not install the Sunny Boy in potentially explosive areas.
CAUTION!
Danger of burn injuries due to hot enclosure parts!
• Mount the Sunny Boy in such a way that it cannot be touched inadvertently during
operation.
CAUTION!
Risk of injury due to the heavy weight of the Sunny Boy!
• Take the weight of the Sunny Boy of approx. 32 kg into account for mounting.
Commentaires sur ces manuels